biomass briquette machine, wood briquette machine

the biomass briquette machine adopts screw type design. wood briquette extruder machine
can make hexagonal cylinder or quadrangular shape briquette with 15-20mm hole in centre. 

This biomass briquette machine is equipped with automatic temperature control system and it is 
widely applied to extrude biomass or high density wood materials (sawdust, straw, rice husk, etc) into bio-fuel briquettes. 
The motor of this machine can be 1kw/15kw/18.5kw/22kw-3phase-380v-50hz electrical driven.

YZ3 series rice husk baler machine applies for pressing and packing light and soft scrap with a density < 70kg/m³. The series of baler machine are fully automatic. Working principle of the rice husk baler machine: YZ3 series hydraulic rice husk baler machine has 3 cylinders: feeding cylinder, pressing cylinder and discharge cylinder. It can control the weight of feeding material by automatically controling its volume. Bank can be divided into 2 parts: storage bunk and press bunk. The storage bunk can be connected to lager external storage bunk or other transmission equipment like converyor. The pressing volume of the pressing bunk can be adjusted by the position of the travel switch in press cylinder.

ball briquette press machine

This ball briquette press machine http://www.zzaixchina.com/ is widely used to make power material like charcoal power, coal power, iron ore fines, gypsum slag cement etc. into ball briquette or other shapes like pillow-shape product. Advantage of the ball briquette press machine: high pressure, high molding rate, high output, easy operation and no flying dust when working. Application of ball briquette product: The ball briquette machne is widely used in industries of metallurgy, mining, coal, refractory, abrasive, fertilizer, ceramics, etc.

charcoal rod extruder machine

This charcoal rod extruder machine is the briquette machine to press the powder of coal, charcoal,
carbon black and other materials into rods of certain intensity.
the shape of rods can be round, six prismatic, square and so on. Also the rod shape can be customized
.
Working Principles of Charcoal Rods Extruder Machine :
the motor transfers the power to the transmission through triangle belt, then the output shaft on the
transmission transfers
the power to the propeller shaft, finally the propeller on the propeller shaft pushes the coal powder into
the mould and out, then the ideal high pressure coal rod is generated.
This process is very simple, and it's easy to operate.
The coal bar pressed from this machine is with high thermostability and will not break into pieces in the process of burning.

the charcoal extruder machine will bring great economic benefit by reducing the cost of making coal bar and also increasing the calorific value.

shisha charcoal tablet press machine

Our shisha charcoal tablet press machine can press charcoal powder into round or square,
rectangular or other shape tablet.
The charcoal powder should be 80mesh and with moisture about 25%.

The shisha charcoal tablet press machine can press 40 times per minute, one time can press
8 pcs of tablet of diameter 50mm, 9pcs of tablet of diameter 40mm,or 14 pcs of tablet of diameter 3.8mm.
The shisha charcoal press machine can press 30000 pieces or so within one hour.

If you are interested in the shisha charcoal tablet press machine please contact me freely
email: hnaixmachine@gmail.com skype:hnaixmachine tel: 0086-18237112102

gas flow wood charcoal carbonization stove

feature of gas flow wood charcoal carbonization stove
1. Energy saving, no smoking and no pollution. There is a gas recycle tube so the combustible smoke produced in the carbonization will return to the heating room of the carbonization stove http://www.zzaixchina.com/ and reused to heat the stove. This greatly saves energy by recycling 95% smoke.
2.Continuous carbonization and high capacity There are many inner tanks. When one shift inner tanks finished carbonization, you can hoist them out for cooling and at the same time, load the other inner tanks into the stove to continue carbonization. So the capacity is higher than other type stoves.
3.Safe and labor saving. You can use the hoist when operating the gas flow carbonization stove, avoid high temperature burning and it is easy work.

Self Igniting Carbonizing Furnace

Self Igniting Carbonizing Furnace http://www.zzaixchina.com/ will change the biomass briquette as charcoal briquette
Self Igniting Carbonizing Furnace Features:
1.Self Igniting Carbonizing Furnace works by anoxic distillation carbonization.
2.Self Igniting Carbonizing Furnace Features is with rational structure. It adopts superheated stream cooling system, reducing much heat consumption;The horizontal condenser can retrieve much wood tar.
3.Self Igniting Carbonizing Furnace is with higher speed cooling, shorter production cycle.