ball briquette press machine

This ball briquette press machine http://www.zzaixchina.com/ is widely used to make power material like charcoal power, coal power, iron ore fines, gypsum slag cement etc. into ball briquette or other shapes like pillow-shape product. Advantage of the ball briquette press machine: high pressure, high molding rate, high output, easy operation and no flying dust when working. Application of ball briquette product: The ball briquette machne is widely used in industries of metallurgy, mining, coal, refractory, abrasive, fertilizer, ceramics, etc.

charcoal rod extruder machine

This charcoal rod extruder machine is the briquette machine to press the powder of coal, charcoal,
carbon black and other materials into rods of certain intensity.
the shape of rods can be round, six prismatic, square and so on. Also the rod shape can be customized
.
Working Principles of Charcoal Rods Extruder Machine :
the motor transfers the power to the transmission through triangle belt, then the output shaft on the
transmission transfers
the power to the propeller shaft, finally the propeller on the propeller shaft pushes the coal powder into
the mould and out, then the ideal high pressure coal rod is generated.
This process is very simple, and it's easy to operate.
The coal bar pressed from this machine is with high thermostability and will not break into pieces in the process of burning.

the charcoal extruder machine will bring great economic benefit by reducing the cost of making coal bar and also increasing the calorific value.

shisha charcoal tablet press machine

Our shisha charcoal tablet press machine can press charcoal powder into round or square,
rectangular or other shape tablet.
The charcoal powder should be 80mesh and with moisture about 25%.

The shisha charcoal tablet press machine can press 40 times per minute, one time can press
8 pcs of tablet of diameter 50mm, 9pcs of tablet of diameter 40mm,or 14 pcs of tablet of diameter 3.8mm.
The shisha charcoal press machine can press 30000 pieces or so within one hour.

If you are interested in the shisha charcoal tablet press machine please contact me freely
email: hnaixmachine@gmail.com skype:hnaixmachine tel: 0086-18237112102

gas flow wood charcoal carbonization stove

feature of gas flow wood charcoal carbonization stove
1. Energy saving, no smoking and no pollution. There is a gas recycle tube so the combustible smoke produced in the carbonization will return to the heating room of the carbonization stove http://www.zzaixchina.com/ and reused to heat the stove. This greatly saves energy by recycling 95% smoke.
2.Continuous carbonization and high capacity There are many inner tanks. When one shift inner tanks finished carbonization, you can hoist them out for cooling and at the same time, load the other inner tanks into the stove to continue carbonization. So the capacity is higher than other type stoves.
3.Safe and labor saving. You can use the hoist when operating the gas flow carbonization stove, avoid high temperature burning and it is easy work.

Self Igniting Carbonizing Furnace

Self Igniting Carbonizing Furnace http://www.zzaixchina.com/ will change the biomass briquette as charcoal briquette
Self Igniting Carbonizing Furnace Features:
1.Self Igniting Carbonizing Furnace works by anoxic distillation carbonization.
2.Self Igniting Carbonizing Furnace Features is with rational structure. It adopts superheated stream cooling system, reducing much heat consumption;The horizontal condenser can retrieve much wood tar.
3.Self Igniting Carbonizing Furnace is with higher speed cooling, shorter production cycle.

wood sawdust briquette machine

The wood sawdust briquette machine http://www.zzaixchina.com is to make solid fuel briquette with such wood material as sawdust, wood chips, branches, crop stalks, sugarcane residue, coffee husk, paddy straw, sunflower stalk, cotton stalks, bamboo dust, palm husk, soybeans husk, tea waste, etc.

The feature of final product from the sawdust briquette machine:
being easy to ignite, and having high calorific value (over 20% higher than normal wood), causing little pollution when burning and with high density which is favorable to transportation.

 if you are interested in the wood briquette machine,
please contact us by skype: hnaixmachine

rotary dryer

Introduction of rotary dryer
Rotary dryer http://www.zzaixchina.com/ shows the features of perfect drying effect, easy operation,high efficiency and easy control This is the ideal equipment for drying materials with high humidity.

structure of rotary dryer Sawdust drying machine includes: Heat furnace, the feed mouth, rotating cylinder, filter tube, material conveying pipe, the cooling tube and the discharge port.

Application of the rotary dryer: Rotary dryer is to dry the wet materials with the humidity of 50% at one time. This device applies to material such as rice shell, saw dust, ground wood chip, tree branch and wood bits, etc (Diameter is less than 3mm; Length, 5mm).

sawdust dryer machine

The sawdust dryer machine http://www.zzaixchina.com/ is used to dry the light material like sawdust, rice hull.
the sawdust dryer machine can reduce the moisture content of the material from 35% to 12%, which is perfect for sawdust briquetting or pelleting.

sawdust dryer machine Structure and working priciple:
Pipeline sawdust dryer is equipped one fuel boiler, feeding inlet, steel pipe, exhaust blower (fan), cyclone. The hot air temperature can be adjusted from 180 °C to 300 °C.
heating ways: fuel can choose: wood (broken wood), coal, steam or electrical heating.
sawdust dryer machine work principle: First, put the wet materials into the hopper.
Then the fuel boiler generates hot air which mixes with wet materials and then the sawdust is sucked into the pipes by the exhaust blower (fan) quickly.
And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

High Capacity Wood Sawdust Crusher Machine

High Capacity Wood Sawdust Crusher Machine

Our high capacity wood sawdust machine is composed of machine body, knife chipping part, chips  re-crushing part and sieving part, etc. The wood sawdust machine combines both chipping and crushing equipment in one machine so the wood sawdust crusher can make sawdust in one passage, no need touse wood chipper for preprocessing of wood logs. Raw material of wood sawdust machine: all kinds of wood, timber scraps, branches, wood chips, edge material, tree bark,bamboo skin and other raw material Application of Wood crusehr machine: the wood sawdust crusher is used to make material for mushroon cultivation, sawdust board production, wood pellet production, wood briquette making, wood powder making, etc. Safe operation procedures of the wood crusher machine 1. Check the wood sawdust crushing equipment before starting and tighten the bolts 2. Clean the stones and metal in the raw material. 3. Non-load Startup. Feed the sawdust machine when it works normally without bigger wood or ironware. 4. Operators should stand at the flank of the feed inlet. 5. Cut off power supply before examining and repairing.